Close
Search
Searching...
No results
    Krones VarioAsept M
    Back
    VarioAsept M product UHT system

      Microbiological safety for your products

      UHT process precisely tailored to milk products

      In the Krones Group, particular focus is on milk – the white gold. Particularly the topic of preservation plays a significant role – as the process is not only governed by the highest hygiene requirements, the product itself must also be treated with extreme care. The VarioAsept M UHT system from Krones meets precisely these requirements.

      At a glance

      • Especially designed for use in the dairy industry
      • Output range: Between 3,500 and 60,000 litres per hour
      • Proven design which ...
        • meets the highest hygiene requirements of dairy-processing companies.
        • treats the product extremely gently.
      • With Krones tubular heat exchangers, developed by Krones process equipment experts
      • In-house laboratory for product analysis
      • Perfectly matched with the Krones aseptic fillers
      Download
      Brochure Krones VarioAsept M
      1.06 MB, .pdf

      Filling and preservation of milk – Various treatment procedures

       

      Components of the modular component system

      Components of the modular component system

      VarioStore tank system for aseptic lines 

      • Vacuum-sealed and pressurised up to 6 bar
      • Fully aseptic, automatic valve manifold between UHT system and buffer tank
      • With integrated system for sterile gas filtration

      Module for media supply

      • Uncoupling of downstream process for stable production conditions

      Krones VarioSpin product deaerator

      Deaeration with patented swirl infeed nozzle:

      • Ensures that gas bubbles will quickly escape from the product
      • Reduces oxidative impact such as loss of vitamins or discolouration of juices

      Heat exchanger

      Depending on product requirements:

      • Plate heat exchanger
      • Tubular heat exchanger with cross-corrugated tubes for less thermal impact

      Alternatively: direct heating with VarioAsept D

      Service module

      • Energy supply for product heat exchanger
      • Electrical and pneumatic controller with MCC and Krones HMI

      Flexible heating options

       

      Direct heating with the VarioAsept D

      Module for steam injection or infusion

      Product range: Dairy products, Plant-based drinks, Sensitive products

      Direct heating with the VarioAsept D

      Procedure 1: infusion

      • The product is fed into the infusion chamber from above.
      • It then drops through the steam-filled chamber where it heats up to the required heating temperature.
      • The product does not come into contact with the hot stainless steel surface of the vessel. The conical end of the chamber itself is cooled.
      • Deaeration is performed during the heating process..

      Scope

      • Products of medium or high viscosity and plant-based drinks
      • Milk and dairy drinks

      Benefits to you

      • Long production times possible
      • Highly flexible technology for sophisticated products with high demands on quality

      Procedure 2: injection

      Steam is injected directly into the product through the adjustable nozzle.

      Scope

      Low-viscose products

       Benefits to you

      Compared to steam infusion:

      • Compact design, significantly reduced footprint
      • Lower operating costs
      • Significantly reduced investment costs
      • Suitable for the majority of products to be treated

      Benefits to you

      Temperature control by choice

      The heating process can be optionally controlled with a precise Fvalue or temperature control system, or through flexible PU regulation.

      Low product losses

      A rework tank for mixing phases, the integrated buffer tank and automatic output regulation in the event of production fluctuations in upstream and downstream systems contribute to high cost effectiveness.

      Long production times

      Aseptic intermediate cleaning with caustic at the product treatment temperature of the heat exchanger can be carried out without interrupting the aseptic filler production as the filler is supplied by the aseptic buffer tank.

      Aseptic product change-over

      Water flushing within 35 minutes between the last and the first bottle (for Krones standard layout) provides high flexibility for production.

      Gentle product treatment

      The thermal and oxidative stress on your product will be reduced because specially designed inner tubes in the selective heater and chiller sections can be heated and chilled again very quickly.


      How can we help you?

      Additional information
      Download
      Do you have any questions?
      Contact
      Krones nearby you
      Sales network
      Come and visit us
      Events
      kronesEN
      kronesEN
      0
      10
      1