The PET-Asept L system has proved its worth among beverage producers all over the world. It provides reliable results, even under problematic ambient conditions and, at the same time, requires amazingly low maintenance.

At a glance

• Latest version of a system proven all over the world
• Aseptic filling of all products 
• Suitable for all bottle shapes
• Bottle sterilisation by means of peracetic acid (PAA)
• Output up to 65,000 bottles per hour*
• Re-use of rinsing water
• Integrated, decentralised ventilation technology by Krones
• Also available as PET-AseptBloc L with blow moulder

L = Liquid
* Based on: 500 ml bottle

Smaller installation surface

• Linear machine design 
• Integration of the valve block into the machine frame 
• Unburdened rinser
• Reduction of the sterilisation modules from three to one
• Integrated, decentralised ventilation technology – no additional controller required

Reduced operation and maintenance work involved

• Tabletec table top inclined to one side
• Integration of the valve block into the machine frame
• Capper in hygienic design

Highly efficient and safe sterilisation

• Spreader-type nozzles for reliable interior treatment of the containers, even in the neck-finish area
• No surface-active agents required
• Hermetically isolated sterile areas

Energy efficiency and environmental friendliness 

• No surface-active agents required 
• Re-use of rinsing water
• The single-channel rinser with improved nozzles reduces the air consumption
• Lower energy consumption thanks to a modified ventilation system

High output

• Minimum loss of product during type change-over by product supply to the filler from the top
• Reduced SIP time by steam sterilisation of the filling valves
• No CIP cups therefore faster and easier operation
• Product change-over: from the last bottle to the first within a mere 150 minutes